Re: [ecasound] hello

Hi! Thanks! Sorry for the delay! I got "too much" emails and sometimes
that happen! Also I do hard work and I was been one the road some nights
for working!

It look like here replies no go to list so the list engine no put the
headers direct the replies go to ecasound-list@email-addr-hidden !

S. Massy wrote:
> On Mon, Oct 15, 2012 at 04:49:06PM +0300, assa wrote:
>> Hi!
>>
>> I'm just subscribed the list! I don't know whats going on here! I think
>> here I could get some help and give some but I'm not very good in
>> explain things and I'm too ofter too wrong because I'm a dreamer! Thanks
> Welcome to the list! We accept both hard-nosed engineers and hazy
> dreamers alike! :)
I have some programming experience too but burned out myself with a
resource handling code I programmed last with php and postresql but
started the code with perl and mysql!
>> for all the ecasound developers and other people! I'm used ecasound
>> about four moths by a bash script! I'm wanted get more in to the
>> ecasound! At the moment I'm using five inputs (guitar, bass, two vocal
>> mike and drums) and one output to PA with also wav file output!
>> Sometimes the ecasound do things by a mystique way for me like when I
>> add a new input all levels can dropped very silence or add something
>> effects etc. all levels can get really high! Maybe I'm build things very
>> wrong so I must dig out things but I'm feeling I'm stocked! I try to
> I think you're much more likely to get (useful) help if you include your
> actual ecasound set-ups, both working and otherwise, so we actually can
> see what might be wrong. Ecasound is very powerful, but its language can
> be somewhat unforgiving to the absent-minded.
I forget things and have some pains in my body so I try and try and get
usually something working! Here is the ecasound command I running and
got out what I liked now but when I added one input for that all levels
dropped very silence(that could happened also before but I'm maybe
cnaged things then without notice it). That's long command and take time
make adds for it but usually I change something every time I use it! It
get for me 1. vocal 2. vocal 3. guitar 4. bass 5. drum and give stereo
output to wav file and mono to monitor speaker I'm using! When I was put
the 6. input for a vocal some problems happened I tried explain before!
I know many things is wrong in my command but I'm just the dreamer and
I'm used the Ecasound only so short time now! With the command I got
just little time ago out a recording like this:
http://youtu.be/dLd9ayzBqgY so at the moment I'm making a band! I have
no the wav file online but I can put it if it's necessary for someone!

  ecasound -r -B:rtlowlatency -b:512 -z:db -f:f32_le,2,88200 -a:1 -i
jack_multi,system:capture_1 -chcopy:1,2 -a:1
-el:gate,166,2200,-68.5,0.01,400,1200,-100,0 -a:1
-el:butthigh_iir,200,1.41 -a:1 -eadb:-0 -a:1 -eadb:0 -a:2 -i
jack_multi,system:capture_2 -chcopy:1,2 -a:2
-el:gate,161,2200,-68.5,0.01,400,600,-100,0 -a:2
-el:butthigh_iir,165,1.41 -a:2 -el:buttlow_iir,2250,0.6 -a:2
-el:foverdrive,0.5 -a:2 -eadb:-5.5 -a:2 -eadb:0 -a:3 -i
jack_multi,system:capture_5 -a:3 -chcopy:1,2 -a:3
-el:gate,60,2200,-58,0.01,400,11600,-63,0 -a:3 -el:butthigh_iir,60,1.41
-a:3 -eadb:-14.5 -a:3
-elv2:http://calf.sourceforge.net/plugins/RotarySpeaker,5,0.7,0.55,1,21,26,1,1
-a:3 -eadb:-0 -a:4 -i jack_multi,system:capture_6 -chcopy:1,2 -a:4
-el:gate,30,2200,-55,0.01,400,11600,-63,0 -a:4 -el:butthigh_iir,30,1.41
-a:4 -eadb:-9 -a:4
-elv2:http://calf.sourceforge.net/plugins/RotarySpeaker,5,0.7,0.55,1,28,34,1,1
-a:4 -eadb:-0 -a:5 -i jack_multi,system:capture_3 -chcopy:1,2 -a:5
-el:gate,20,900,-45,0.01,400,11600,-63,0 -a:5 -el:butthigh_iir,20,1.41
-a:5 -eadb:0 -a:5 -el:sc4,0,1.5,200,-10,7,3,0,30 -a:5 -eadb:3 -a:5
-eadb:-0 -a:1,2 -o loop,12a -a:112,113,118 -i loop,12a -a:112
-el:gate,166,2200,-67,0.01,400,200,-63,0 -a:112 -el:buttlow_iir,2500,0.6
-a:112 -eadb:0 -a:112 -el:sc4,0,1.8,200,-50,1.3,18,10,0,2 -a:112
-elv2:http://calf.sourceforge.net/plugins/RotarySpeaker,5,0.7,0.55,1,28,33,1,1
-a:112 -eadb:-2.8 -a:112 -eadb:-11.5 -a:113
-el:gate,161,1200,-63,25,750,2200,-100,0 -a:113 -el:buttlow_iir,1050,0.6
-a:113 -eadb:-9 -a:113 -el:sc4,0,1.5,200,-30,1.3,18,27,0 -a:113
-el:foverdrive,0.85 -a:113
-elv2:http://calf.sourceforge.net/plugins/RotarySpeaker,5,0.7,0.55,1,28,33,1,1
-a:113 -eadb:-3.8 -a:113 -eadb:-11.5 -a:118
-el:gate,161,2200,-60,25,750,2200,-100,0 -a:118 -el:foverdrive,1.2
-a:118 -el:VintageDelay,191,1,1,1,0.376,3.629,0,2,0 -a:118 -eadb:-0
-a:118 -el:tap_autopan,0.9,100 -a:118 -eadb:-3.4 -a:118 -eadb:-11.5
-a:112,113,118,3,4,5 -o loop,main_mix -a:30 -i loop,main_mix -a:30
-el:sc4,0,0.01,1200,-1.1,3.5,18,10,0,0 -a:30 -o loop,out2 -a:21,22 -i
loop,out2 -a:21 -eadb:0 -a:21 -o
jack_multi,system:playback_1,system:playback_1 -a:22 -eadb:-14 -a:22
-f:s16_le,2,88200 -a:22 -o /tmp/aa-2012-10-28_02-00-38-390241844-a.wav
> Also, you might consider checking Nama[1] out, which is a DAW-like
> abstraction to control the ecasound engine. It's main purpose is for
> recording and mixing, but it certainly can output to a soundcard as well, and
> effect management is very good.
> 1. https://github.com/bolangi/nama
I checked the web page but I need little time find out! I see I'm
installed that Nama in my debian system already but I'm not tested it
yet! Quickly that seem to be great! I moved to Ecasound just for test
mixing with it and left my mixer unit out from my setup! Also I found
out some effects can use with the Ecasound! I'm not sure is the Ecasound
enough stable for use as live in band working but with my style little
problems is more than everyday happenings! Anyway the audio quality is
for me much better than trough by the external mixer's output and I got
those gate and few more things working I have no enough money and space
use by external units at them moment!

> Hope this helps.
I like that! All help what was given as the help! I respect and many
thanks! Assa!
> Cheers,
> S.M.
>
> ------------------------------------------------------------------------------
> Don't let slow site performance ruin your business. Deploy New Relic APM
> Deploy New Relic app performance management and know exactly
> what is happening inside your Ruby, Python, PHP, Java, and .NET app
> Try New Relic at no cost today and get our sweet Data Nerd shirt too!
> http://p.sf.net/sfu/newrelic-dev2dev
> _______________________________________________
> Ecasound-list mailing list
> Ecasound-list@email-addr-hidden
> https://lists.sourceforge.net/lists/listinfo/ecasound-list

------------------------------------------------------------------------------
WINDOWS 8 is here.
Millions of people. Your app in 30 days.
Visit The Windows 8 Center at Sourceforge for all your go to resources.
http://windows8center.sourceforge.net/
join-generation-app-and-make-money-coding-fast/
_______________________________________________
Ecasound-list mailing list
Ecasound-list@email-addr-hidden
https://lists.sourceforge.net/lists/listinfo/ecasound-list
Received on Sun Oct 28 04:15:03 2012