On Wed, Jul 18, 2012 at 09:21:37AM -0700, William Goldsmith wrote:
> Hi all,
>
> I'm wondering if anyone has put together a chain setup to do multiband
> compression/limiting, similar to the sox mcompand function? I know that
> ecasound contains all of the necessary bits & pieces, but I've never worked
> with the ecasound bandpass filters & don't want to reinvent anything if I
> don't have to.
>
> I'd love to replicate this sox command (with jack inputs/outputs, which is
> why I'm not using sox):
>
> play track1.wav gain -3 sinc 8000- 29 100 mcompand \
> "0.005,0.1 -47,-40,-34,-34,-17,-33" 100 \
> "0.003,0.05 -47,-40,-34,-34,-17,-33" 400 \
> "0.000625,0.0125 -47,-40,-34,-34,-15,-33" 1600 \
> "0.0001,0.025 -47,-40,-34,-34,-31,-31,-0,-30" 6400 \
> "0,0.025 -38,-31,-28,-28,-0,-25"
> Thanks for any suggestions or assistance
Hi Bill,
First of all, when you see how much work this is, you might
try to configure ALSA to feed it's output to JACK so that
you can use sox.
http://jackaudio.org/routing_alsa
Second you'll probably be using some LADSPA plugins for this,
you might try the Linux Audio Users list if you don't get an
suitable answer here.
Finally, you might be able to use Nama's mastering mode
configuration as a starting point. Nama configures Ecasound
as a three-band compressor with a limiter on the output.
+- Low -+
| |
User tracks --- Master -- Eq ----+- Mid -+--- Boost -- output
| |
+- High +
The Eq track (i.e. chain) hosts an equalizer.
The Low, Mid and High tracks each apply a bandpass
filter, a compressor and a spatialiser.
The Boost track applies gain and a limiter.
Here are the LADSPA effects and parameters
eq: Parametric1 1 0 0 40 1 0 0 200 1 0 0 600 1 0 0 3300 1 0
low_pass: lowpass_iir 106 2
mid_pass: bandpass_iir 520 800 2
high_pass: highpass_iir 1030 2
compressor: sc4 0 3 16 0 1 3.25 0
spatialiser: matrixSpatialiser 0
limiter: tap_limiter 0 0
Here are Julien Claassen's Notes
Eq: All sections are initially off. You can turn them
on as needed, one at a time.
Bandpass: Default settings are courtesy of Fons
Adriaensen, who says they will be within 1.5dB of
flat settings.
Compressor is turned off, with reasonable default values
set.
Spatialiser and limiter: both initially off so you can start out
clean and slowly work your way from there.
Below is a typical chain setup, sans effects,
as generated by Nama.
Chain No. Track name Comment
-------------------------------------------
1 Master Default mix track
3 brass Normal user track
9 Eq
10 Low
11 Mid
12 High
13 Boost
# ecasound chainsetup file
# general
-z:mixmode,sum -G:jack,Nama,send -b:256 -z:db,100000 -z:nointbuf
# audio inputs
-a:1 -i:loop,Master_in
-a:10,11,12 -i:loop,Eq_out
-a:13 -i:loop,Boost_in
-a:3 -i:brass_12.wav
-a:9 -i:loop,Master_out
# post-input processing
-a:3 -chcopy:1,2
# audio outputs
-a:1 -o:loop,Master_out
-a:10,11,12 -o:loop,Boost_in
-a:13 -o:alsahw,Intel
-a:3 -o:loop,Master_in
-a:9 -o:loop,Eq_out
And here is the whole ball of wax, as saved
by cs-save-as
# ecasound chainsetup file
# general
-b:256 -r:50 -z:nointbuf -z:db,100000 -n:"/home/jroth/nama/untitled/Setup.ecs" -X -z:noxruns -z:nopsr -z:mixmode,sum
# audio inputs
-a:1 -f:f32_le,2,44100 -i:loop,Master_in
-a:10,11,12 -f:f32_le,2,44100 -i:loop,Eq_out
-a:13 -f:f32_le,2,44100 -i:loop,Boost_in
-a:3 -f:s16_le,1,44100 -i:/home/jroth/nama/untitled/.wav/brass_12.wav,
-a:9 -f:f32_le,2,44100 -i:loop,Master_out
# audio outputs
-a:1 -f:f32_le,2,44100 -o:loop,Master_out
-a:10,11,12 -f:f32_le,2,44100 -o:loop,Boost_in
-a:13 -f:s16_le,2,44100 -o:alsahw,0,0,0
-a:3 -f:f32_le,2,44100 -o:loop,Master_in
-a:9 -f:f32_le,2,44100 -o:loop,Eq_out
# chain operators and controllers
-a:1 -epp:50.00 -ea:100.00
-a:10 -eli:1891,9.90,2.00 -eli:1882,0.00,4.00,16.00,0.00,0.90,3.24,0.00,0.00,0.00 -eli:1422,0.00
-a:11 -eli:1892,9.90,9.90,2.00 -eli:1882,0.00,4.00,16.00,0.00,0.90,3.24,0.00,0.00,0.00 -eli:1422,0.00
-a:12 -eli:1890,9.90,2.00 -eli:1882,0.00,4.00,16.00,0.00,0.90,3.24,0.00,0.00,0.00 -eli:1422,0.00
-a:13 -eli:2145,0.00,0.00,551.00 -eli:2149,30.00,30.00,10.00,0.80,2106.00 -eli:1436,81.00,1.00,81.00,1.00,81.00,1.00,0.00,60.00,40.00,50.00,0.00 -eli:1776,6.00,1.00,0.00 -ea:100.00 -eli:2145,0.00,0.00,551.00
-a:9 -eli:1970,1.00,0.00,0.00,7.60,0.12,0.00,0.00,8.30,0.12,0.00,0.00,9.20,0.12,0.00,0.00,9.90,0.12,0.00
Hope that helps,
Joel
> -bg
> ---
> Bill Goldsmith
> Radio Paradise
> www.radioparadise.com
-- Joel Roth ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Ecasound-list mailing list Ecasound-list@email-addr-hidden https://lists.sourceforge.net/lists/listinfo/ecasound-listReceived on Thu Jul 19 00:15:04 2012
This archive was generated by hypermail 2.1.8 : Thu Jul 19 2012 - 00:15:04 EEST